MidNite Solar MNE250SMA-QUAD MSTR Master E-Panel for SMA

MidNite Solar MNE250SMA-QUAD MSTR Master E-Panel for SMA

Features

• Environmental Rating - Type 1 (Indoor)
• Warranty - 5 yrs.
• Listed by ETL for US & Canada
• Made in the USA

The MNE250SMA-QUAD MSTR This E-Panel works with 3 of the MNE250SMA-Slave E-Panels to create a Quad stack of Sunny Islands. The MNE250SMA-Quad Mstr master includes the Quad 125amp, 120/240vac input/output bypass system. This E-Panel can be used in conjunction with a Sunny Island inverter as part of a Quad off-grid, battery backup or AC Coupled system. Terminals are provided for hookup to leg 1 + 2 in the Slave E-Panels. Comes with 250amp battery disconnect breaker and inverter cables. Pre-wired with AC input and output wiring for leg 1 (master) inverter. (Three slaves are also required for Quad system.)

Master E-Panel for a 18-24KW quad Sunny Island inverter system. The quad system can be off-grid, AC coupled, battery backup grid tie or battery backup. Three Slave E-Panels and three additional Sunny Island inverters required.

NOTE: A back plate (MNESMA-Short BP or MNESMA-Tall-BP) is recommended for the proper wiring alignment of the Sunny Island.

Variations

• MNE250SMA-QUAD MSTR
  
• MNE250SMA-QUAD MSTR-E
  The MNE250SMA-QUAD MSTR-E is our Export version. It is the same E-Panel but with the proper color wires and proper breakers for a 230v 50hz inverter.

This Master E-Panel in a quad Sunny Island inverter system includes:

• 125amp, 120/240vac AC Output/Bypass system
• Separate 60amp, 120/240vac AC input and output breakers for the master inverter
• 6 Extra spaces on the face to the Right of the main battery breaker for the black bodied (MNEAC or MNEPV) CBI Din Rail breakers
• 4 Spaces on the left side and 6 spaces on the right side of the chassis for the Panel mount 3/4 inch breakers (MNEDC)
• 250amp battery breaker with inverter cables
• 500amp/50mV shunt (MNSHUNT)
• Battery negative busbar
• AC input and Output busbars
• Neutral and ground busbars
• AC input and output wiring
• Transition terminals to Slave E-Panels
• Space provided for 6 additional 1/2" wide din rail mount AC or DC breakers and up to 12 3/4" wide panel mount breakers. All breakers are hydraulic-magnetic and rated for continuous duty.
• Knockouts located for battery cables
• AC conduit connections

Attachments

• MidNite Solar SMA E-Panel Installation Manual
• MidNite Solar SMA E-Panel Dimensions Drawing
• MidNite Solar Classic Simple Flow Diagram