MidNite Solar MNE175XWP-SINGLE E-Panel Schneider XW

MidNite Solar MNE175XWP-SINGLE E-Panel Schneider Electric Conext XW

E-Panel for a single Schneider Electric XW Plus inverter/charger. The XW Plus inverter is mounted directly above the E-Panel for a 16 in wide assembly.

Features

• Inverter battery breaker
• 2 separate 60 amp AC inputs for generator and utility
• 60 amp AC bypass switch
• Knockouts for up to seven din rail mount DC DCGFP63 or AC breakers and 12 panel mount or DC-GFP80 breakers
• Massive tin plated copper bus bars directly connect to the XW's battery terminals
• Bus bars for AC inputs
• AC output neutral, ground, PV + in, PV- in, Bat +, Bat-
• 500 amp shunt (MNSHUNT)
• Metal dead front behind the reversible door
• Charge controllers mount to either side or both sides at once for dual controllers
• AC bypass can be configured as input & output on/off as well as AC bypass.(Note: The XW 60 amp controller can mount on the Right side only due
• to their isolated communications compartment)
• The XW MPPT controller requires no mounting bracket. FM60, FM80 and Classic require Right or Left E-Panel charge control mounting brackets.
• Right hand bracket furnished standard.
• Main Breaker Current Rating - 250
• Number of spaces - 19
• Environmental Rating - Type 1 (Indoor)
• Max. Wire Size - 4/0 AWG
• Max. AC Voltage - 240VAC
• Max. DC Voltage - 300VDC
• Warranty - 5 yrs.
• Listed by ETL for US & Canada
• Made in the USA

Variations

• MNE175XWP-SINGLE: North American model w/175A circuit breaker
• MNE175XWP-SINGLE-E: The MNE175XWP-SINGLE-E is our Export version. It is the same E-Panel but with the proper color wires and proper breakers for a 230v 50hz inverter.

Attachments

• MidNite Solar SINGLE E-Panel Instruction Manual