Cotek CX1250 3-Stage Advanced Battery Charger 12VDC 50A

Cotek CX1250 3-Stage Advanced Battery Charger 12VDC 50A. Add to cart to see our every day low Stellar Price!

Cotek CX1250 is an advanced Microprocessor controller 3-stage automatic battery charger.

Features

• Universal AC input with active PFC
• Suitable for lead acid, Li-ion, Gel and AGM batteries
• 3-stage charging mode
• Dry contact for alarm
• Support RS-232 communication protocol
• Voltage temperature compensation
• 2 stage fan speed control (sleep mode)
• High efficiency and high reliability
• Built-in battery rescue function
• Built-in Engine Start Battery (ESB) output function
• Single output support single battery
• Protection: Short Circuit / Over Voltage / Over Temperature / Brown-out
• Withstand 2G vibration test
• Type 1 Indoor Aluminum Enclosure
• CE approved
• Accessory:
  • Remote controller CR-1

FAQs

• The manual says the Nominal Input Voltage is 100-240VAC (100-120VAC only for UL458). Which is the nominal input voltage?
  The product can accept 100-264V. The 100-120V shown in the manual and on the battery charger label is the UL certification range. The UL label on the battery charger does not show the full range of 100-264V, because there is not a UL certification available for the full AC range of the Cotek CX24 Series Battery Charger. Keep in mind, that since this is a single-phase product and not split-phase, you cannot connect 2 x 120V hot leads in the AC input to achieve 240V. Doing so will damage the unit and void your warranty. Instead, use 1 x 240 hot, 1 x neutral, and 1 x ground into the AC input.
• What type of wire ends do you need to interface with the output terminals?
  Since they are screw terminals, you can use either bare end wire or ring terminals.

Attachments

• Cotek CX12xx Datasheet
• Cotek CX Series Quick Start Guide
• Cotek CX Series User Manual