MidNite Solar
MidNite Solar MNEPV80 DIN Circuit Breaker 80A 150VDC
- SKU:
- MNEPV80
- Condition:
- New
- Availability:
- Ships in 1 business day or less.
- Weight:
- 0.63 LBS
- Warranty:
- 5 Year Manufacturer
- Shipping:
- Stellar Speed! ADD TO CART TO ESTIMATE SHIPPING
MidNite Solar MNEPV80 DIN Circuit Breaker 80A 150VDC 2-Pole.
MidNite's breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting. All MidNite circuit breakers can be used at 100% rated current when mounted in a MidNite enclosure.
Read about the MidNite Solar MNEPV80 165 VDC ETL TEST STORY
MNEPV breakers are the same as CBI QY breakers except the standard used is inadequate for the solar industry. MidNite breakers have been evaluated by ETL to 150VDC and are listed for US and Canada. All of the NRTL listings still apply. Breakers ordered under the CBI part numbering system will not be listed for 150VDC and in many cases are not suitable for the solar industry.
The ++ at the bottom of the circuit breaker points to the highest current source. The -- in the top of the circuit breaker points to the lowest source.
- 80 amp Din rail mount breaker.
- 10,000 AIC.
- Accepts up to #2 wire.
- Breaker Torque Value: 20 In-Lbs (2.3NM)
- Environmental Rating - Type 1 (Indoor)
- Listed for US & Canada
FAQs
No, the MNEPV80 is not a bidirectional circuit breaker. It is an omnidirectional circuit breaker.
No, this circuit breaker is used in a negative or floating grounded system. For positive grounded systems, instead you may want to consider the MidNite Solar MNEPV Circuit Breaker 300VDC 2-Pole.
CBI Electric is the manufacturer for MidNite Solar's MNEPV80 circuit breakers and they are normally rated to 125V, however, because the MNEPV80 circuit breakers are built to MidNite Solar's specifications, MidNite Solar rates the MNEPV80 breaker to 150VDC when used in a MidNite Solar combiner, MidNite Solar E-Panels, or the MidNite Solar MNBIGBABY Enclosure.
Attachments