MidNite Solar MNEDC125RT Circuit Breaker with Remote Trip

MidNite Solar MNEDC125RT Circuit Breaker 125A 125VDC Panel Mount with Remote Trip (Shunt Trip Circuit Breaker).

MidNite's breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting. This breaker has the Remote Trip feature that allows it to work with our Battery Disconnect Module ( MNBDM-24 or MNBDM-48 ) and the Rapid Shutdown System.

• All MidNite circuit breakers can be used at 100% rated current when mounted in a MidNite enclosure.
• The remote trip voltage to be applied should be between 24 and 30 volts DC.
• The voltage applied must be a pulse lasting no more than 0.1 second or damage may result.
• There is no warranty on breakers with a burnt out trip coil.

Features

• Breaker Torque Value: 30 In-Lbs (3.4NM)
• Environmental Rating - Type 1 (Indoor)
• AIC 10,000 at 125VDC
• Warranty - 5 yrs.
• Listed for US & Canada

Specifications

• FL. AMP: 125
• Max Volts: 150
• Hertz: DC
• Delay: 14
• Trip Amps: 156
• Circuit: K0
• V.Coil: 24(19TRIP)VDC
• Width is 1 inch (25.4mm) - 1/4 inch studs
• Includes two 6-32 x 5/16" pan head phillips mounting screws

FAQs

• What is the difference between this 125A circuit breaker with remote trip and a 125A circuit breaker without the remote trip?
  The MNEDC125RT also provides a means of disconnect via the two metal tabs on the rear of the circuit breaker, however, if you do not need this feature, you can still use it as a standard 125A circuit breaker.
• Is the MidNite Solar MNEDC125RT Circuit Breaker a non-polarized circuit breaker?
  Yes, the MidNite Solar MNEDC125RT Circuit Breaker is a non-polarized breaker.

Attachments

• MidNiteSolarMNEDC125 E-Series Breaker Specifications
• MidNiteSolarMNEDC125 Specifications
• MidNite Solar Breaker and Busbar Torque Values